Fix: iPhone Stuck on Apple Logo After Update

 Fix: iPhone Stuck on Apple Logo After Update (2025 Guide) 

Updating your iPhone should make it faster and better, but sometimes, things go wrong. One common issue iPhone users face is the getting stuck on the Apple logo after an update. If your iPhone is frozen on the startup screen, don't panic! In the guide, we’ll explore why it happens, how to fix it step-by-step, and how to prevent it in the future.

 

Why Is Your iPhone Stuck on the Apple Logo?

Your iPhone gets stuck on the Apple logo usually because something is blocking the boot process. Here are the main causes: below

Interrupted iOS update

Corrupted firmware or data

Incompatible or faulty apps

Battery or hardware issues

Jailbreaking gone wrong

 

Step-by-Step Fixes

Let’s go through proven solutions to get your iPhone working again.

 

1. Force Restart Your iPhone

This is a first and easiest fix. It clears minor system glitches.

How to Force Restart:

iPhone 8, SE (2nd gen), X and newer:

Press and quickly release Volume Up, then Volume Down, then press and hold Side Button until the Apple logo disappears and reappears.

iPhone 7 / 7 Plus:

Hold down Volume Down + Power (Sleep/Wake) button until you see the Apple logo again.

iPhone 6s / 6s Plus / SE (1st gen):

Hold down Home + Power buttons until the screen turns off and the Apple logo appears.

If your iPhone still won’t go past the Apple logo, continue to the next step.

 

2. Use the Recovery Mode via iTunes or Finder

Recovery Mode helps fix system issues without erasing your data (most of the time).

Steps:

1. Connect your iPhone to the PC or Mac using a lightning cable.

2. Open iTunes (on Windows/macOS Mojave or earlier) or Finder (macOS Catalina or newer).

3. Put the iPhone into Recovery Mode:

Follow the force restart method, but keep holding the last button until you see the Recovery Mode screen (not the Apple logo).

4. On your computer, you’ll see the option to Update or Restore.

Click Update (this tries to reinstall iOS without erasing data).

5. Wait until the update completes.

 Important: If Update fails, use Restore  but this will erase your all data.

 

3. Try DFU Mode (Advanced Recovery)

DFU (Device Firmware Update) mode is the deeper restore level than Recovery Mode. Only use this if nothing else works.

Steps to Enter DFU Mode (iPhone 8 and above):

1. Connect your iPhone to the computer.

2. Quickly press and release Volume Up, then Volume Down.

3. Press and hold Side button for 10 seconds until the screen turns black.

4. While holding the Side button, press and hold the Volume Down for 5 seconds.

5. Release the Side button, but keep holding Volume Down for 10 more seconds.

If the screen stays black and Finder/iTunes detects your iPhone, you’re in DFU mode.

 Now click Restore iPhone from iTunes/Finder.

 

 4. Use a Third-Party iOS Repair Tool (No Data Loss)

If you're not comfortable using iTunes or don't want to lose your data, several third-party tools can fix iOS system issues without wiping your iPhone:

ReiBoot by Tenorshare

Dr.Fone - Repair by Wondershare

iMyFone Fixppo

These are tools offer Standard and Advanced modes. Always try Standard Mode first to avoid data loss.

 

5. Contact the Apple Support or Visit a Service Center

If your iPhone is still stuck on the Apple logo after trying all software-based solutions, it may be a hardware issue like:

Faulty NAND flash memory

Battery connector issue

Logic board damage

Take your iPhone to an authorized Apple service center or book an appointment via the Apple Support app.

 

Bonus: How to the Prevent iPhone Stuck on Apple Logo After Updates

Prevention is the always better than cure. Follow these tips to avoid this issue in the future:

Keep enough free storage (at least 5GB before updates)

Back up regularly via iCloud or iTunes

Use official iOS updates only (avoid beta if you’re not a developer)

Avoid jailbreaking

Update apps before updating iOS

 

 Frequently Asked Questions (FAQ)

Will I lose data if my iPhone is stuck on the Apple logo?

Not always. If Force restart and Update via Recovery Mode won’t erase data. But Restore and DFU Mode will, unless you have a backup.

Can a bad battery cause this issue?

Yes. A faulty battery or hardware issue can prevent your iPhone from booting.

Is this covered under Apple warranty?

If your iPhone is under warranty and the issue isn’t due to the damage or unauthorized modifications, Apple usually covers it.

 

Final Thoughts

Having your iPhone stuck on the Apple logo after an update can be frustrating, but it is often fixable with the right steps. Start with a force restart, then move to Recovery or DFU Mode if needed. Use a third-party tool for data-safe repair, or contact Apple if it's a hardware fault.

 

These are step for iphone stuck on the Apple logo see the steps and fix it